Specifying the Ink Drying Time for Rolls
When you are using paper that takes longer for ink to adhere, if the Cutter touches printed surfaces that are still wet, it may
damage the paper or cause rough cut edges. Also, ink may be transferred onto the paper surface during ejection, soiling it.
You can prevent problems by adjusting the drying time after printing before the paper is cut.
Windows
1. Display the printer driver dialog box.
(See "Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows).") →P.207
2. Select the Main sheet and click C Advanced Settings in A Media Type.
Handling Paper
>
Handling rolls
>
iPF6300 Specifying the Ink Drying Time for Rolls
6
733
To Next Page
Loading...
Need help?
General