Note
• If the message below is displayed but the Print Plug-In window is not displayed, install the newest
imagePROGRAF printer driver and then attempt step 3.
The imagePROGRAF Printer Driver for iPFxxxx is either not installed correctly or not instal-
led at all. Please install.
(The iPFxxxx portion of the above message will reflect your printer name.)
• If the message below is displayed but the Print Plug-In window is not displayed, convert the image to
RGB color or grayscale as the color space and then attempt step 3.
Choose RGB color or grayscale as the color space.
Important
• If the profile was created by a commercially available profile creation tool, the profile may have been
created in ICCv4 format. If the image source profile is ICCv4, Adobe CMM is required. If Adobe
CMM has not been installed, a message is displayed and the source profile is changed to Adobe RGB.
If you want to use an ICCv4 profile, close the plug-in and then install Adobe CMM. Refer to Using
Adobe CMM →P.342 for details on how to install Adobe CMM.
Starting from Digital Photo Professional
Follow the procedure below to start the Print Plug-In from Digital Photo Professional.
1. Start Digital Photo Professional.
2. Open the RGB color image that you want to print.
3. If required, select the print range.
Note
• Images for use with Print Plug-In are less than 6,000 pixels in width and height. Reduce the selection
range or reduce the image with processing for images more than 6,000 pixels in width and height, and
then attempt step 3.
Windows Software
>
Print Plug-In for Photoshop/Digital Photo Professional
>
iPF6300 Starting from Digital Photo Professional
4
305
To Next Page
Loading...
Need help?
General