Output Settings Panel
Enlarged/Reduced Printing
Select the method for enlarged/reduced printing.
The following settings are available for enlarged/reduced printing.
Setting Details
Fit Paper Size Enlarges/reduces the whole page automatically to fit the media size selected for
output. Select the media size to print from Paper Size.
Fit Roll Paper Width Enlarges/reduces the whole page automatically to fit the width of the roll paper
with the page width.
*Make sure that the width of the roll paper in the printer is set correctly for Roll
Paper Width in the Paper Settings panel.
*Displayed only if rolls are selected in Paper Source.
Scaling Enlarges/reduces the whole page by the scaling rate as specified. Input the scaling
value in numerical characters. You can specify a range between 5 and 600%.
*You can change the numbers by clicking either â–² button or â–¼ button.
*Although Scaling can be set to make the image larger than the media size, the
part that does not fit in the media cannot be printed.
*This is not displayed when a checkmark is placed in Borderless Printing.
Borderless Printing
You can print the media without margins on all sides when the roll paper with the specific width and the specific media type
is used.
Mac OS X Software
>
Color imageRUNNER Enlargement Copy
>
iPF6300 Output Settings Panel
5
591
To Next Page
Loading...
Need help?
General