Note
• To display the Paper Detailed Settings dialog box, on the Main sheet, click Settings by Media Type.(See
"Main Sheet →P.209 ")
A Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying Time setting is only valid for rolls.
• (See "Specifying the Ink Drying Time for Rolls
→P.733 ")
B Between Pages
Specify the time the printer waits after printing a page until ejecting the paper, as needed.
C Between Scans
Specify the time the printer waits after printing a line on the page until printing the next line, as needed.
D Roll Paper Margin for Safety
You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is held firmly
against the Platen.
E Near End Margin
Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.
F Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic cutting
is used.
H Calibration Value
You can specify whether to apply the results of calibration performed on the printer to image processing.
G Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image with the
left and right sides inverted.
Windows Software
>
Printer Driver
>
Paper Detailed Settings Dialog Box iPF6300
4
214
To Next Page
Loading...
Need help?
General