1. If the message "Leave 70cm (28") space behind printer." is displayed, check the space behind the printer, pull up
the four Front Tray Guides above the Ejection Guide, and press the OK button.
Note
• Sufficient space behind the printer is required when loading paper in the Front Paper Feed Slot. For
details on the installation space required, see "Specifications." →P.859
2. After "Open Upper Cover" is displayed, open the Top Cover.
3. Set the leading edge of one sheet, printing-side up, on the Front Tray Guides, and insert the sheet in the Front Paper
Feed Slot, keeping it level.
Caution
• When you insert the sheet in the Front Paper Feed Slot, keep the sheet level, relative to the paper feed
slot. Failure to do this may scratch the printing surface.
Handling Paper
>
Handling sheets
>
iPF6300 Loading Sheets in the Feed Slot
6
751
To Next Page
Loading...
Need help?
General