To Next Page

To Previous Page

dvanced Guide

Scanning

Scanning with Other Application Software

ScanGear (Scanner Driver) Screens

> Color

Settings Tab

Color Settings Tab

On the Color Settings tab, you can specify the following settings.

Color Adjustment

Select either of the following. Recommended is selected by default.

This function is available when Color Mode is Color or Grayscale.

Recommended

Select this to vividly reproduce the tone of a document on the screen. It is recommended that you

normally select this setting.

Color Matching

Select this to automatically match the scanner, monitor and color printer colors, thus reducing

time and trouble to manually match the monitor and printer colors.

Color Adjustment Buttons will be disabled.

This function is available when Color Mode is Color.

- Source(Scanner): Select scanner profile.

- Target: Select target profile.

- Monitor: Select this to display preview image with optimum correction for monitor.

- Defaults: Returns to the default Color Matching settings.

None

Select this to disable color correction provided by ScanGear (scanner driver).

Note

Color Matching is available when ScanGear (scanner driver), monitor, color management-

compliant application (such as Photoshop) and printer are set up correctly.

Refer to the corresponding manual for the monitor, printer and application settings.

Always Execute the Auto Tone

Select this checkbox to always apply Auto Tone to scanned images. This checkbox is selected by

default.

Important

This function is available when Color Mode is Color or Grayscale.

You cannot select this setting when None or Color Matching is selected on the Color Settings tab.

Page 493 of 681 pagesColor Settings Tab

Canon MP480 series User Manual

Questions and Answers: