78
Turning Off the Image Stabilizer
The image stabilizer compensates for camcorder shake even at full telephoto. It tries to
compensate for horizontal movements; therefore, you may decide to turn it off when you
mount the camcorder on a tripod.
Open the menu and select [CAMERA SETUP]. Select [IMG STAB ], set
it to [OFF] and close the menu.
“ ” disappears.
The image stabilizer cannot be turned off when the program selector is set to
EASY.
The image stabilizer is designed to compensate a normal degree of camcorder
shake.
The image stabilizer might not be as effective when using the night modes.
Demonstration Mode
The demonstration mode displays the camcorder’s main features. It starts automatically
when you leave the camcorder turned on without loading a recording media for more than
5 minutes. However, you can set the camcorder not to start the demonstration mode.
Open the menu and select [DISPLAY SETUP/ ]. Select [DEMO MODE],
set it to [OFF] and close the menu.
To cancel the demo mode once it has begun, press any button, turn off the
camcorder or load a recording media.
CAMERA
PLAY (VCR) CARD CAMERA CARD PLAY
MENU
(37)
CAMERA SETUP IMG STAB
•••
ON
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
(37)
DISPLAY SETUP/ DEMO MODE
••••
ON
To Next Page
Loading...
Need help?
General
