86
Audio Dubbing
You can add sound with the built-in microphone. With the MVX350i/MVX330i, you can
also add sound from audio devices or with an external microphone.
This function is operated with the wireless controller.
Connecting
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
Connecting a Microphone
See Recording with an External Microphone ( 61).
Dubbing
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Open the menu and select [AUDIO SETUP]. Select
[AUDIO DUB.], set it to [AUDIO IN] or [MIC.IN] and close the menu.
3. Locate the scene you wish to start audio dubbing.
4. Press the PAUSE button on the wireless
controller.
CAMERA
PLAY (VCR)
CARD CAMERA CARD PLAY
MENU
(37)
AUDIO SETUP AUDIO DUB.
•••
AUDIO IN
R
L
AUDIO
OUTPUT
Signal flow
STV-250N Stereo Video Cable
(supplied)
Audio device
(e.g. CD player)
To Next Page
Loading...
Need help?
General
