93
Using a Memory Card
E
File Numbers
Images are automatically assigned file numbers from 0101 to 9900 and stored in folders
containing up to 100 images. Folders are assigned numbers from 101 to 998.
You can choose to use consecutive file numbers (CONTINUOUS) or to reset the file
number each time a different memory card is inserted (RESET). We recommend setting
the file numbers to CONTINUOUS.
To change the setting, open the menu and select [CARD SETUP]. Select
[FILE NOS.], set it to [RESET] and close the menu.
RESET The file number will be reset each time a new memory card is
inserted. If the memory card already contains image files, the
consecutive file number will be assigned.
CONTINUOUS The camcorder memorizes the file number of the last image and
assigns the consecutive file number to the next image, even
when a new memory card is inserted. (If a higher file number
already exists on the memory card, the consecutive number will
be assigned.) There will be no duplication of file numbers. This
is useful for organizing images on a computer.
CAMERA
PLAY (VCR) CARD CAMERA
CARD PLAY
MENU
(37)
CARD SETUP FILE NOS.
••••
CONTINUOUS
101
When you replace the memory card
and record an image.
When you record 3 images.
Example:
CONTINUOUS RESET
101-0102
101-0103
101-0104101
101-0101101
101-0101
To Next Page
Loading...
Need help?
General
