82
List of Messages
The following messages may appear on the LCD monitor during
shooting or playback. Please refer to the Direct Print User Guide for
the messages that display during a printer connection.
Busy...
zImage is being recorded to, or read from, memory card. The
playback mode is starting up.
No memory card
zYou turned on the camera without a memory card installed.
Card locked!
zThe SD card is write-protected.
Cannot record
zYou attempted to shoot an image without a memory card.
You attempted to record a sound memo on a movie.
Memory card error
zMemory card has experienced an anomaly.
Memory card full
z
Memory card is full of images and no more can be recorded or
saved. Or no more image settings can be recorded.
No more sound memos can be recorded.
Naming error!
zThe image could not be created because there is an image with
the same name as the folder that the camera is attempting to
create, or the highest possible file number has already been
reached. In the Set up Menu, set the File Numbering option
to [Auto Reset]. Save all the images you wish to retain onto a
computer, then reformat the memory card. Please note that
formatting will erase all the existing images and other data.
Change the batteries.
zBattery charge is insufficient to operate the camera. Replace with
unused AA-size alkaline batteries or fully charged Canon AA-
size NiMH batteries (be sure to replace all the batteries at the
same time).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
