23
Preparing the Camera, Basic Functions
Battery Status Indications
The indicators blink as explained below, and the LCD
monitor displays an icon or message to let you know
when batteries are low or depleted.
Batteries are beginning to run low. Replace
or recharge the batteries if you wish to
continue using the camera.
If the LCD monitor is off, this icon will appear
when you press any of the following buttons:
or / MF.
Batteries are fully depleted and the camera
can no longer operate. You should replace
the batteries immediately.
Never use batteries that look like this.
Batteries with all or part of the seal (electrical
insulation sheath) peeled off.
The positive electrode (plus terminal) is flat.
The negative terminal is correctly formed (protruding
from the metal base), but the seal does not extend up
over the edge of the metal base.
Change the
batteries
Power indicator
blinks green.
To Next Page
Loading...
Need help?
General
