58
Reviewing an Image Right After Shooting
Available in the following modes.
After a photo is taken, the image displays on the LCD
monitor for two seconds. There are two ways to display
the image for longer as explained below.
• Keeping the shutter button pressed
The image continues to appear on the LCD monitor as
long as you keep the shutter button fully depressed.
• Pressing the
button while the image is
displayed
If you press the button while the image is displayed
on the LCD monitor, it will continue to display even after
the shutter button is released.
Press the shutter button halfway again to stop displaying it.
You can perform the following while images are displayed.
- Erasing Images Individually (p. 15, 136)
- Magnifying Images (p. 123)
To Next Page
Loading...
Need help?
General
