Operations Common to All Modes
EN-12
Use the bo dial to change a number (tone number, etc.) or
value (tempo value, etc.), and to select menu items. You can
determine what operation you can perform with the bo dial by
checking the NUM indicator on the display.
■ To change a value or number (NUM indicator
displayed)
While the NUM indicator is displayed, the bo dial can be used
to change a number or value.
Example: Tone number selection screen
Example Operations
“To select an instrument for playing” (page EN-14)
“To adjust the tempo (beats per minute) value” (page EN-18)
• If a dial operation causes the value being changed to reach
its initial default (or recommended) value, the NUM
indicator will blink once to let you know.
■ To select a menu item (NUM indicator not
displayed)
If a menu appears while you are configuring a setting and the
NUM indicator is not displayed, you can use the bo dial to
select the menu item you want.
Example: Function setting screen
Example Operations
“To configure function settings” (page EN-45)
“To configure precount and metronome settings” (page
EN-43)
Use the procedure below when you need to change the name
of data saved on a USB flash drive or to input other text.
■ To insert a character
1.
Use the bo dial to move the cursor to the
position where you want to insert a character.
2.
Press ck Area 2.
This inserts “A” at the cursor position and displays the
NUM indicator.
• At this time you can change the “A” to a different
character if you want. To do so, perform the procedure
under “To change a character” from step 2.
Dial Operations
Sta
g
e
Pno
Text Character Input
NUM indicator not displayed
To Next Page
Loading...
Need help?
General
Weight and Dimensions
