EN-13
Operations Common to All Modes
■ To change a character
1.
Use the bo dial to move the cursor to the
position of the character you want to change,
and then press bp ENTER.
This displays the NUM indicator.
2.
Use the bo dial to change the currently
selected character.
3.
After the character is the way you want, press
(or long-press) bp ENTER to apply the change.
This causes the NUM indicator to disappear.
• Input of the characters shown in the table below is
supported when saving a file to a USB flash drive.
• If you input a similarity symbol ( ), it will be displayed
as a right arrow (
3
).
• If you use this procedure to edit the file name of a file
on a FAT32 formatted USB flash drive, you will not be
able to input some of the characters shown above.
■ To delete a character
1.
Use the bo dial to move the cursor to the
position of the character you want to delete.
2.
Press ck Area 1.
■ To save edited text
1.
Press cl STORE.
The FUNCTION indicator is either flashing or not flashing
when you perform a Digital Piano function setting (page
EN-45) or other special setting operation. The meanings of
the text that appears along with a non-flashing or flashing
FUNCTION indicator are described below.
* Only while a setting that is a function setting is displayed.
An example of what the FUNCTION indicator indicates is
shown below.
1.
Press bp FUNCTION.
This displays “Touch”.
• “Touch” is a setting name, so the FUNCTION indicator
is not flashing.
2.
Press bp ENTER.
This causes “Touch” to change to “Normal” (the initial
default Touch Response setting). Since “Normal” is a
setting option, the FUNCTION indicator flashes.
3.
To return to the setting name display, press
bp FUNCTION.
This causes the FUNCTION indicator to stop flashing.
4.
To exit the setting screen, press bq TONE.
This causes the FUNCTION indicator to disappear.
0
A
N
[
i
v
!
1
B
O
]
j
w
#
2
C
P
^
k
x
$
3
D
Q
_
l
y
%
4
E
R
`
m
z
&
5
F
S
a
n
{
'
6
G
T
b
o
}
(
7
H
U
c
p
~
)
8
I
V
d
q
+
9
J
W
e
r
,
;
K
X
f
s
-
=
L
Y
g
t
.
@
M
Z
h
u
FUNCTION Indicator
Indicator Indicates this:
Not flashing Item name*
Flashing Setting of the displayed setting item
Example: To configure the Touch Response
setting
Touch
Setting number Setting name
Not flashing
No r
m
a
l
Flashing
Setting number Setting
To Next Page
Loading...
Need help?
General
Weight and Dimensions
