40
Recording Movie Images and Audio
Voice Recording lets you record audio only, without a snapshot or movie.
• For information about Voice Recording capacities, see page 122.
. Recording audio only
1. In the REC mode, press [SET].
2. Press [SET] towards [8] or [2] to select the bottom Control Panel
option (BS) and then press [SET] (page 31).
3. Press [SET] towards [8], [2], [4], or [6] to select the “Voice
Recording” scene and then press [SET].
This causes ` to appear on the monitor screen.
4. Press the shutter button to start recording.
• The back lamp flashes green while recording is in
progress.
• Pressing [SET] during recording will insert a
marker into the recording. During playback, you
will be able to jump to the markers in the recording.
5. Press the shutter button again to stop audio
recording.
• To create another audio recording file, repeat
steps 4 and 5.
• To turn off Voice Recording, press [SET], press [SET] towards [8] or [2] to
select the top Control Panel option (Auto recording mode), and then select
R (Auto) or Ÿ (Premium Auto).
NOTE
• You can press [SET] towards [8] during audio recording to toggle the monitor
screen on and off.
• When monitor screen contents are turned off, selecting the “Voice Recording”
scene will cause the monitor screen to turn off immediately (page 11).
About audio data
• Audio files can be played back on a computer with Windows Media Player or
QuickTime.
– Audio Data: WAVE/IMA-ADPCM (WAV extension)
Recording and Playing back Audio Only (Voice Recording)
Recording time
Remaining recording
time
To Next Page
Loading...
Need help?
General
