47
Advanced Settings
Advanced Settings
The following are menu operations you can use to configure various camera settings.
• REC mode menu contents and operations are different from those in the PLAY
mode. This section explains operations using the REC menu screen. See page 69
for information about PLAY menu screen operations.
. Example REC Menu Screen Operation
1. In the REC mode, press [MENU].
This will display the REC menu screen.
2. Press [SET] towards [4] or [6] to select
the tab where the menu item you want
to configure is located.
3. Press [SET] towards [8] or [2] to
select the menu item you want, and
then press [SET] towards [6].
4. Press [SET] towards [8] or [2] to
change the setting of the selected menu
item.
5. After the setting is the way you want,
press [SET] to apply the setting and
return to the viewfinder screen.
• Pressing [SET] towards [4] instead of
pressing it down applies the selected
setting without exiting the menu screen.
• To configure settings on another tab after
pressing [SET] towards [
4] to return to the
menu item selection, press [SET] towards
[
8] or [MENU] to move the highlighting up
to the tabs, and then press [SET] towards
[
4] or [6] to select the tab you want.
Using On-screen Menus
Example:
When “Size” is selected
on the “Quality” tab
Tabs
Selected menu item
Settings
[MENU]
To Next Page
Loading...
Need help?
General
