114
ADVANCED SETTINGS
Perform the following steps to change the focus mode.
1. In a REC mode, press
[MENU].
2. On the “REC” tab,
select “Focus” and
then press [X].
3. Use [S] and [T] to select the focus mode
setting you want and then press [SET].
• See the following pages of this section for details about
shooting with each focus mode.
Using Auto Focus
1.
Align the monitor screen’s focus frame with
the subject you want to focus and then half-
press the shutter button.
This camera will perform the focus operation.
You can tell if the image is in focus by checking the
operation lamp and the focus frame color.
Focus Mode Icon
Status Operation Lamp Focus Frame
Focusing
Complete
Lit Green Green
Not Focused Flashing Green Red
F2.7
1/1000
ISO
100
Focus Frame
Operation Lamp
To Next Page
Loading...
Need help?
General
