67
SHOOTING A SNAPSHOT
3. Use [S] and [T] to select the setting you want,
and then press [SET].
• An asterisk (*) indicates reset default settings.
4. After making the menu settings you want,
select “Exit Menu” and then press [SET].
• See the following sections for full details about each setting.
– Using the Flash (page 72)
– Using the Self-timer (page 77)
– Specifying Image Size (page 62)
Snapshot Shooting Precautions
■ Operation
• While the operation lamp is flashing green, never open the
battery cover or place the camera onto or remove it from the
USB cradle. Doing so can result in incorrect storage of the
image you just shot, damage to other images stored in
memory, malfunction of the camera, etc.
• If unneeded light is shining directly onto the lens, shade the
lens with your hand when shooting an image.
Menu Item: Available Settings:
Flash
(Auto Flash)* / (Flash On) /
(Flash Off)
Self-timer (10-second self-timer) / *
Image Size * / /
To Next Page
Loading...
Need help?
General
