15
QUICK START BASICS
(page 56)
1. Slide open the lens cover to turn on the
camera.
• Take care that you do not touch the lens when sliding the
lens cover.
2. Align the mode dial with “ ” (Snapshot).
This causes “ ” to appear on the monitor screen.
• If “ ” (PLAY Mode) is on the monitor screen, make
sure that the lens cover is open and then press the
shutter button or [ ] (PLAY). This will switch to the
currently selected REC Mode.
3. Point the camera at the subject.
4. While taking care to keep the camera still, half-
press the shutter button.
When the image is in focus, the camera will beep, the
operation lamp will light green, and the focus frame will turn
green.
Shooting a Snapshot
136
07/12/24
12:37
2
Snapshot icon
Focus Frame
Shutter Button
Lens Cover
Monitor Screen
Operation Lamp
Mode dial
To Next Page
Loading...
Need help?
General
