133
ADVANCED SETTINGS
IMPORTANT!
• The metering mode will change to “Center Weighted”
automatically if you change the EV shift value (page 126) to
anything other than 0.0 while “Multi” is selected. The
metering mode will change back to “Center Weighted”
when the EV shift value is changed back to 0.0.
• When “Multi” is selected as the metering mode, the
icon will not be displayed on the monitor screen when you
return to a REC mode information display (page 253).
You can use the procedure below to expand the dynamic range,
which makes it possible to capture the bright areas of an image
while reducing the chance of underexposure. When shooting a
subject that is back lit, for example, an expanded dynamic range
minimizes underexposure.
1. In a REC mode, press [MENU].
2. On the “Quality” tab, select “Dynamic Range”
and then press [X].
Reducing the Effects of
Underexposure
To Next Page
Loading...
Need help?
General
