143
ADVANCED SETTINGS
3. Use [S] and [T] to select the setting you want
and then press [SET].
IMPORTANT!
• The icons listed below do not appear on the display while
icon help is turned off.
– Flash mode icon (page 72)
– White balance icon (page 128)
– Metering mode icon (page 132)
Using Mode Memory to Configure Power
On Default Settings
You can configure the camera so it saves certain settings in
“mode memory” whenever it is turned off, and restores the
settings the next time you turn the camera back on. This keeps
you from having to configure the camera each time you turn it off
and on.
See step 4 of the setting procedure below for information about
the settings you can save with mode memory.
1. In a REC mode, press [MENU].
2. On the “REC” tab, select “Memory” and then
press [X].
3. Use [S] and [T] to select the item you want to
configure and then press [X].
To do this:
Select this
setting:
Display icon help text next to the icon of
a function when you select the function
On
Turn off icon help Off
AWB
To Next Page
Loading...
Need help?
General
