204
OTHER SETTINGS
You can use the procedure below to specify what happens when
you press the [ ] (PLAY) button.
1. Press [MENU].
2. On the “Set Up” tab, select “ Power On”
and then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
NOT
• The initial factory default for this setting is “Power On”.
• Change this setting to anything besides “Disable” before
connecting to a TV for image viewing.
Configuring [ ] (PLAY) Button
Settings
To configure the button to do this
when pressed:
Select this
setting:
Turn on the camera Power On
Turn on the camera when held down for
about one second
• This setting prevents turning on the
camera accidentally when it is being
carried in a bag, etc.
Hold: On
Do not turn on the camera Disable
B
To Next Page
Loading...
Need help?
General
