78
SHOOTING A SNAPSHOT
Using the Self-timer to Shoot an Image
• The image is not shot right
away after you press the
shutter button. Instead,
shooting starts after the
preset time elapses. The
AF assist/REC light/self-
timer lamp flashes while
the countdown is being
performed.
• You can interrupt an
ongoing self-timer
countdown by fully
pressing the shutter button
while the self-timer lamp is
flashing.
NOT
• The indicator “1sec” appears on the monitor screen
between Triple Self-timer shots. How long it takes for the
camera to get ready to shoot again after it shoots an image
depends on the image size and quality settings, whether or
not a memory card is loaded in the camera, and the flash
charge condition.
• No self-timer operation can be performed when recording
with the any of the following settings.
– Normal-speed continuous shutter mode
– “Layout” or “Auto Framing” BEST SHOT sample scene
selected
– “ Tracking” selected for “AF Area”
• The Triple Self-timer cannot be used when performing the
following recording operations.
– Recording with certain BEST SHOT scenes (Business
Cards and Documents, Whiteboard, etc., Old Photo)
– Recording with High-speed Continuous Shutter or Flash
Continuous Shutter
AF Assist/REC light/
Self-timer Lamp
B
To Next Page
Loading...
Need help?
General
