114
CHAPTER
6
Command
Reference
PRINT
[Output element] [
{
' }
[Output
element)]*
®
Function:
Displays an
output
element.
Parameter:
Output
element:
Output
control function (CSR), numeric expression,
character expression.
Explanation:
1) Displays an
output
element. When an
output
control function
is
added, the
element
is
displayed at the location determined by this function.
2) Values are displayed for numeric expressions and character expressions.
3) When
an
output
element
is
a numeric expression, a position for sign (
+,
-)
is
placed before the value. However,
the+
sign
is
displayed
as
a blank.
• Character display . . . . . . . . . . .
____
__,
Output
element
• Numeral display . . .
.. ..
...
..
'7' ~ ~ ~
'--------
Sign
Output
element
4)
When
an
output
element
is
a numeric expression and the mantissa
is
more
than
10 dlgits, the 11th digit
is
rounded off. When an exponent exists besides
the mantissa, an exponent sign
(E) and a two digit exponent are displayed.
5)
","
and
";"
can be used
as
punctuation between
output
elements. When
","
is
used, the execution stops (STOP
is
displayed) after the first
output
element
is
displayed, then the next
output
element
is
displayed by pressing the
§]
key. When
";"
is
used, the next
output
element
is
displayed continuously
after the first one.
6) When no
output
element
is
specified (only PRINT
is
written), the display
is
cleared and
is
not
stopped.
7) The display
is
not
stopped during printing in
the
print mode (
~
(2)
).
8) The format for displaying numeric values can be specified by a SET state-
ment.
To Next Page
Loading...
Need help?
General
