178
7-1 Specifying
the
MEMO
IN
Mode
With its DAT A BANK function, this computer can be used
as
an "electronic
memo
pad"
in which data (memo data) can be conveniently written and from
which the necessary data can be retrieved by simple
ke
( operations.
In order to utilize the DATA BANK function, it will first be necessary
to
input
and store data.
Specify the
MEMO
IN mode
to
input
data
to
the DAT A BANK.
Pressing
~~
will specify the
MEMO
IN mode and the display will appear
as
shown below.
MEMO
IN mode display
Record number
BUZZER
DEG
Cursor
The symbol "
~~"
at the upper center
of
the display shows
that
the
MEMO
IN mode
is
currently specified. The number at the upper right
is
the record
number which indicates the memo data line.
The above display shows
that
the cursor
is
blinking at the left end with nothing
stored in the DATA BANK
as
yet and the computer
is
in the key-input waiting
state for Record 1.
If
the record number happens
to
be 5, it will mean
that
four
lines
of
memo data have already been stored in the DATA BANK.
To Next Page
Loading...
Need help?
General
