Casio KL-7000 User Manual

45
3. Use L to highlight DIRECTON, and press SET.
• Since there are eight options on this menu, they do not all fit on a single screen. To
view the four options at the bottom of the menu, press L four times.
4. Use L to highlight VERT (vertical).
5. Press SET to return to the text input screen.
Mirror Image
When you specify mirror image for text, it is printed in reverse image. Use mirror image
when you plan to print on transparent tape, with the printing on the inside. When viewed
through the transparent tape, the text will appear normal. You can also use mirror image
printing when using iron-on transfer tape to print iron-on transfers.
• Normal
• Mirror Image
To specify mirror image
1. Input the text you want to print.
2. Press FORM to display the FORM menu.
3. Use L to highlight MIRROR, and press SET.
• Since there are eight options on this menu, they
do not all fit on a single screen. To view the four
options at the bottom of the menu, press L four
times.
4. Use K and L to highlight selection you want.
• Highlight MIRROR to switch mirror image on, and NORMAL to switch it off.
5. Press SET to return to the text input screen.
Text Alignment
After you specify the length of the tape to be printed, you can position the text on a label to
be left flush, right flush or centered. You should remember that the results that you get from
a text alignment specification will depend on whether your label is made up of one block or
multiple blocks. The following shows examples of each option available.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
A
SET
Yes No
ESC
LENGTH
PITCH
FEED
BL SPACE
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
AA
A
SANS-SERIF
MANUAL FEED
6mm
SET
Yes No
ESC
A
MIRROR
NORMAL
MIRROR

Casio KL-7000 Specifications

General

Brand	Casio
Model	KL-7000
Category	Label Maker
Language	English