59
To show the image display
Press IMAGE, and the display shows what your text will look like when it is printed. The text
automatically scrolls from right to left while you have this key pressed.
To show the layout display
1. Press LAYOUT to show the layout display.
• This display shows you a rough outline of how the various elements will be laid out
on the tape.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
SET
ESC
1
4 8cm
2. To view the part of the display that runs off the right, press J.
• Note that you can scroll the display to the right only. You cannot scroll to the left.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
SET
ESC
2
9 6cm
3. Keep pressing J until you reach the final display.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
SET
ESC
3
13 4cm
4. Press ESC to return to the normal input screen.
To feed tape
Each time you press FUNC and then FEED, the tape is fed about 16 mm.
Indicates total tape length
Indicates more to the right
Indicates tape length up to this display
Indicates more to the right
Indicates tape length up to this display
Text blocks
Text blocks
To Next Page
Loading...
Need help?
General
