Options
Product guide – CESAB S200
93
Built-in charger
The charger has a capacity of 30 A. It is self-adjusting and can be used for voltages
between 195 V and 264 V AC, 47 to 63 Hz. Freely ventilated batteries up to 320 Ah
and valve regulated batteries from 134 to 201 Ah can be charged
Feature
The built-in charger enables battery charging with the truck connected to a wall
outlet.
Benet
This simplies the charging procedure, especially on sites with only a few trucks.
It also is possible to charge the truck in different places in the hall.
Feature
When the truck is charging, this is indicated in
the display. During charging, dashes blink to
indicate charging progress. When charging is
complete, the character display indicates the
number of Ah charged into the battery.
Benet
It is easy to determine when the battery has
been fully charged and how much energy has
been used in the process.
Feature
The start function is electronically blocked when the truck is charging. If the opera-
tor is logged in when the charger is connected to the wall socket, he will be logged
out automatically.
Benet
This prevents unintentional truck travel with the cable connected to the wall sock-
et. This is a highly reliable function since it does not use any mechanical switches
prone to wear.
To Next Page
Loading...
Need help?
General
