104 Instruments and Controls
Trip Computer
The trip computer is located in the
Driver Information Center.
The trip computer is divided into 3
sections:
.
Trip Pages
.
Vehicle Pages
.
Eco Pages
Trip Pages
To operate the trip computer, press
the MENU button in the turn signal
lever.
Turn the adjusting knob to scroll
through the following menu items:
.
Digital Speedometer.
.
Combined Trip 1 and Trip 2.
.
Fuel Range.
.
Instantaneous fuel economy.
.
Timer.
.
Outside Air Temperature.
Some modes can be reset by
pressing the SET/CLR button.
Digital Speedometer
This mode indicates the vehicle
speed.
Combined Trip 1 and Trip 2
This mode indicates the current
distance travelled, average vehicle
fuel consumption and average
vehicle speed since the last reset.
To reset, press and hold the SET/
CLR button.
Fuel Range
The Fuel Range display shows the
approximate distance the vehicle
can be driven without refuelling.
The fuel range estimate is based on
an average of the vehicle fuel
economy over recent driving history
and the amount of fuel remaining in
the fuel tank.
When the fuel range estimate is less
than 64 km, Fuel Level Low
message will appear on the Driver
Information Center and the low fuel
control indicator will start to flash.
See Low Fuel Warning Light 0 95
and
Driver Information Center (DIC)
0 96.
The distance can be different
depending on driving patterns.
Note
As an auxiliary device, the trip
computer may differ from the actual
distance for remaining fuel
according to circumstances.
The driving distance for remaining
fuel can be changed by the driver,
the road, and the vehicle speed
because it is calculated according to
the changing fuel efficiency.
Instantaneous fuel economy.
This mode indicates the
instantaneous fuel economy of the
vehicle to the user reflecting the
effect of acceleration on fuel
consumption
Timer
The timer function measures the
time that has passed since the last
reset, using the elapsed time.
To Next Page
Loading...
Need help?
General
