Lighting 109
Automatic Light Control
When the automatic light function
AUTO is switched on, the system
switches on the headlights and
taillights automatically, depending
on the exterior illumination
conditions.
This function operates with a short
delay in dependence of lighting
conditions.
If the windscreen wipers continue to
operate 8 cycles when it is dark
enough outside, the exterior lamps
will illuminate automatically.
Headlamp High/
Low-Beam Changer
To switch from low to high beam,
push the lever.
To switch to low beam, pull the
lever.
{
Warning
Always switch the high beam
headlights to low beam when you
approach oncoming vehicles or
other vehicles ahead. High beam
(Continued)
Warning (Continue d)
headlights can temporarily dazzle
other drivers, which could result
in a collision.
Flash-to-Pass
To activate the headlight flash, pull
the lever.
Headlamp Range
Adjustment
For right hand drive.
To Next Page
Loading...
Need help?
General
