Driving and Operating 187
Driving Information
Driving Environment
General Motors is continuously
concerned with environmental
protection and has used
environment-friendly materials and
recycled materials as much as
possible in the design and assembly
of products.
The production methods also meet
the requirements for environmental
protection. The use of harmful
materials, such as asbestos and
cadmium has been discontinued.
The air conditioning system uses a
hydrocarbonate fluorochloride-free
refrigerant. The pollutant percent in
the exhaust has been reduced.
Environmental Policy of
General Motors
“General Motors is engaged in
preserving the environment and
natural resources through the
establishment of goals and targets
that enable continuous improvement
of its environmental performance,
waste reduction, compliance to laws
and rules, the prevention of
pollution, and good communication
with the community.”
Note
.
The use of lubricating oil results
in its partial damage, which is
reflected in the formation of
carcinogenic compounds, resins,
among others;
.
The disposal of used lubricating
oil in soil or waterways is
prohibited by law and create
serious environmental damage;
.
The uncontrolled combustion of
lubricating oil generates harmful
residual gases to the
environment;
.
Recycling is the proper disposal
method for this residue.
Recycling Requirements
When the lubricant needs to be
changed, look preferably for a
Chevrolet dealer.
Driving for Better Fuel
Economy
Important information about fuel
consumption:
.
Whenever it is possible, turn off
the engine. Even for a short
period of time, the fuel
consumption will be decreased.
.
Avoid accelerating the vehicle
too much. Abrupt changes of
speed will increase the
consumption.
To Next Page
Loading...
Need help?
General
