Driving and Operating 205
longer shift automatically or
manually because it is locked in a
certain gear.
Have the cause of the fault rectified
by a Chevrolet dealer.
Interruption of Power
Supply
In the event of an interruption of
power supply, the selector lever
cannot be moved out of the P
position. The ignition key cannot be
moved out of the ignition lock.
If the battery is discharged, start the
vehicle using jump cables, see
Jump Starting 0 282.
If the battery is not the cause of the
fault, release selector the lever and
remove the ignition key from the
ignition lock.
Release Selector Lever
1. Apply the parking brake.
2. Open the cover to the right of
the selector lever.
3. Insert a screwdriver in the hole
until the lever is unlocked,
move the selector lever out of
P position and move to the N
position.
4. Close cover.
To Next Page
Loading...
Need help?
General
