Instruments and Controls 87
Amber : Warning, information,
failure
Green : Confirmation of activation
Blue : Confirmation of activation
White : Confirmation of activation
Engine Coolant
Temperature Gauge
Displays the coolant temperature.
Left area : Regular operating
temperature not yet reached
Central area : Normal operating
temperature
Right area : Temperature too high
If the engine is too hot, the gauge
pointer will move toward the red
area, a warning chime will activate,
and the Driver Information Center
will also display a message. Seek
the assistance of a Chevrolet
dealer.
See Driver Information Center (DIC)
0 96.
Caution
To avoid damage to the engine,
check the coolant level and seek
the assistance of a Chevrolet
dealer.
Turn Signal
G flashes green.
Flashes
The control indicator flashes if a turn
signal or the hazard warning
flashers is activated.
See Turn and Lane-Change Signals
0 111.
Safety Belt Reminders
> for driver's seat illuminates or
flashes red.
When the ignition is switched on,
this control indicator is activated and
remains active for some seconds, to
remind the driver to fasten the
safety belt.
Soon after the ignition is switched
on or the engine is started, the
control indicator begins to flash, and
also a chime sounds, for a few
To Next Page
Loading...
Need help?
General
