Starting Tunnel Services New: ok
Starting PMIP Services: ok
Starting Portal Server Services: ok
Starting mDNS Services: ok
Starting Management Services:
Web Server: CLI: Secure Web: ok
Starting IPSec Profiles component: ok
Starting FEW Services: ok
Starting MS Agent Services: ok
Semaphore priority is larger than limit of 640
Starting Fabric Services: ok
(Cisco Controller)>
Step 6
If the controller passes the POST, the bootup script runs the Startup Wizard, which prompts you for basic
configuration information.
Welcome to the Cisco Wizard Configuration Tool
Use the '-' character to backup
System Name [Cisco_d9:16:24]:
The startup wizard runs the first time that you power on the controller. The second time you power
it on, the controller prompts you for a login ID and password.
Note
Using the Startup Wizard
Before you can use the startup wizard, you must obtain the information discussed in the (Link to Required
Tools and Information section). The table below contains startup wizard information you can use to configure
your controller for basic operation.
Note
•
The available options appear in brackets after each configuration parameter. The default value appears
in all uppercase letters.
•
If you enter an incorrect response, the controller provides you with an appropriate error message
such as invalid response, and returns to the wizard prompt.
•
Press the hyphen key if you need to return to the previous command line.
Table 7: Startup Wizard Information
ActionWizard Setting
Enter the system name, which is the name you want to assign to the controller. You
can enter up to 31 ASCII characters.
System Name
Enter the administrative user name to be assigned to this controller. You can enter
up to 24 ASCII characters for each.
The default administrative username is admin.
Administrative user
name
Cisco 3504 Wireless Controller Installation Guide
29
Installing the Cisco 3504 Wireless Controller
Using the Startup Wizard
To Next Page
Loading...
Need help?
General
Weight and Dimensions
