Send document comments to nexus7k-docfeedback@cisco.com
4-13
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Chapter 4 Configuring Layer 3 Interfaces
Configuring Layer 3 Interfaces
Configuring Inband Management in the Nexus Chassis
You can a create VLAN interface for inband management in the Cisco Nexus 7000 Series switches when
there are only F1 Series modules in the chassis.
Caution We recommend that you use a dedicated VLAN for inband management on the F1 Series modules. Do
not run data traffic on the VLAN that you are using for inband management.
BEFORE YOU BEGIN
Ensure that you are in the correct VDC (or use the switchto vdc command).
SUMMARY STEPS
1. configure terminal
2. feature interface-vlan
3. interface vlan number
4. no shutdown
5. management
6. ip address ip-address/length
7. (Optional) show interface vlan number
8. (Optional) copy running-config startup-config
To Next Page
Loading...
Need help?
General
