Send document comments to nexus7k-docfeedback@cisco.com
7-60
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Chapter 7 Configuring vPCs
Feature History for Configuring vPCs
Related Documents
Standards
MIBs
Feature History for Configuring vPCs
Table 7-3 lists the release history for this feature.
Related Topic Document Title
Configuring Port Channels Chapter 6, “Configuring Port Channels,”
Configuring Layer 2 interface Chapter 3, “Configuring Layer 2 Interfaces,”
Configuring Layer 3 interfaces Chapter 4, “Configuring Layer 3 Interfaces,”
Shared and dedicated ports Chapter 2, “Configuring Basic Interface Parameters,”
Command reference Cisco Nexus 7000 Series NX-OS Interfaces Command Reference,
Release 5.x
Interfaces Cisco DCNM Interfaces Configuration Guide, Release 5.x
System management Cisco Nexus 7000 Series NX-OS System Management Configuration
Guide, Release 5.x
High availability Cisco Nexus 7000 Series NX-OS High Availability and Redundancy
Guide, Release 5.x
VDCs Cisco Nexus 7000 Series NX-OS Virtual Device Context
Configuration Guide, Release 5.x
Release Notes Cisco Nexus 7000 Series NX-OS Release Notes, Release 5.x
Standards Title
IEEE 802.3ad —
MIBs MIBs Link
• IEEE8023-LAG-CAPABILITY
• CISCO-LAG-MIB
To locate and download MIBs, go to the following URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
Table 7-3 Feature History for Configuring vPCs
Feature Name Releases Feature Information
vPCs 5.2(1) Added the graceful consistency-check command to enable
the vPC primary device to forward traffic when inconsistent
configuration is detected between the peers.
vPCs 5.2(1) Added per-VLAN consistency checking so that only those
VLANs with inconsistent configuration are suspended.
To Next Page
Loading...
Need help?
General
