Cisco 7206 - VXR Router User Manual

Send document comments to nexus7k-docfeedback@cisco.com
2-14
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Chapter 2 Configuring Basic Interface Parameters
Default Settings
Default Settings
Table 2-5 lists the default settings for the basic interface parameters.
Configuring the Basic Interface Parameters
When you configure an interface, you must specify the interface before you can configure its parameters.
The following sections explain how to specify the interface and configure each of its basic parameters:
• Specifying the Interfaces to Configure, page 2-15
• Configuring the Description, page 2-16
• Configuring the Beacon Mode, page 2-17
• Changing the Bandwidth-Rate Mode, page 2-19
• Configuring the Error-Disabled State, page 2-22
• Configuring the MDIX Parameter, page 2-25
• Configuring the Debounce Timer, page 2-26
• Configuring the Interface Speed and Duplex Mode, page 2-28
• Configuring the Flow Control, page 2-30
Table 2-5 Default Basic Interface Parameter Settings
Parameters Default
Description Blank
Beacon Disabled
Debounce timer 100 milliseconds
Bandwidth Data rate of interface
Throughput delay 100 microseconds
Administrative status Shutdown
MTU 1500 bytes
UDLD global Globally disabled
UDLD per-port enable state for fiber-optic media Enabled on all Ethernet fiber-optic LAN ports
UDLD per-port enable state for copper media Disabled on all Ethernet 10/100 and
1000BASE-TX LAN ports
UDLD message interval Disabled
UDLD aggressive mode Disabled
Carrier delay 2 seconds or 50 milliseconds
Error disable Disabled
Error disable recovery Disabled
Error disable recovery interval 300 seconds
Link debounce Enabled
Port profile Disabled

Cisco 7206 - VXR Router Specifications

General

Brand	Cisco
Model	7206 - VXR Router
Category	Network Router
Language	English