EasyManuals Logo
Home>Cisco>Switch>Catalyst 2960-XR

Cisco Catalyst 2960-XR User Manual

Cisco Catalyst 2960-XR
404 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #386 background imageLoading...
Page #386 background image
PurposeCommand or Action
Remove the current configuration of a parameter with
the no form of the command.
no {device-role | hop-limit {maximum | minimum} |
managed-config-flag | match {ipv6 access-list | ra prefix-list
} | other-config-flag | router-preference maximum|
trusted-port}
Step 11
Example:
Switch(config-nd-raguard)# no match ipv6 access-list
(Optional)—Displays the ND Guard Policy
configuration without exiting the RA Guard policy
configuration mode.
do show ipv6 nd raguard policy policy_name
Example:
Switch(config-nd-raguard)# do show ipv6 nd raguard
policy example_policy
Step 12
How to Attach an IPv6 RA Guard Policy to an Interface
Beginning in privileged EXEC mode, follow these steps to attach an IPv6 Router Advertisement policy to an
interface or to VLANs on the interface :
SUMMARY STEPS
1.
configure terminal
2.
interface Interface_type stack/module/port
3.
ipv6 nd raguard [attach-policy policy_name [ vlan {vlan_ids | add vlan_ids | except vlan_ids | none |
remove vlan_ids | all} ] | vlan [ {vlan_ids | add vlan_ids | exceptvlan_ids | none | remove vlan_ids |
all} ]
4.
do show running-config
DETAILED STEPS
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 1
Specifies an interface type and identifier; enters the
interface configuration mode.
interface Interface_type stack/module/port
Example:
Switch(config)# interface gigabitethernet 1/1/4
Step 2
Attaches the Neighbor Discovery Inspection policy
to the interface or the specified VLANs on that
ipv6 nd raguard [attach-policy policy_name [ vlan {vlan_ids |
add vlan_ids | except vlan_ids | none | remove vlan_ids | all} ]
Step 3
interface. The default policy is attached if the
attach-policy option is not used.
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
364 OL-29434-01
Configuring IPv6 First Hop Security
How to Attach an IPv6 RA Guard Policy to an Interface

Table of Contents

Other manuals for Cisco Catalyst 2960-XR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 2960-XR and is the answer not in the manual?

Cisco Catalyst 2960-XR Specifications

General IconGeneral
BrandCisco
ModelCatalyst 2960-XR
CategorySwitch
LanguageEnglish

Related product manuals