Cisco Catalyst 3560-CX User Manual

Internal Power Supply
All the switches except Catalyst 3560CX-8PT-S are powered through their internal power supplies. The
internal power supply is an autoranging unit that supports input voltages between 100 and 240 VAC. Plug
the AC power cord into the AC power connector and into an AC power outlet.
Security Slot
The switches have security slots on the rear panel. You can install an optional cable lock, such as the type
that is used to secure a laptop computer, to secure the switch.
Figure 7: Switch Rear Panel
For PoE models, the security slot is on the right side of the rear panel.Note
Auxiliary Power Adapter
Catalyst 3560CX-8PT-S switches can be powered either through the 10/100/1000 uplink ports receiving power
from a PoE, PoE+ or UPOE switch or through an auxiliary AC-DC or DC-DC power adapter. You can order
Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide
10
Product Overview
Internal Power Supply

Cisco Catalyst 3560-CX Specifications

General

Brand	Cisco
Model	Catalyst 3560-CX
Category	Switch
Language	English