Cisco Catalyst 3560-CX User Manual

Installing the Cisco Microsoft Windows Vista and Windows 7 USB Driver
SUMMARY STEPS
1.
Obtain the Cisco USB console driver file from the Cisco.com web site and unzip it.
2.
If using 32-bit Windows Vista or Windows 7, double-click the setup.exe file in the Windows_32 folder.
If using 64-bit Windows Vista or Windows 7, double-click the setup(x64).exe file in the Windows_64
folder.
3.
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
4.
The Ready to Install the Program window appears. Click Install.
5.
The InstallShield Wizard Completed window appears. Click Finish.
6.
Connect the USB cable to the PC and the switch console port. The USB console port LED turns green,
and the Found New Hardware Wizard appears. Follow the instructions to complete the driver installation.
DETAILED STEPS
Step 1
Obtain the Cisco USB console driver file from the Cisco.com web site and unzip it.
You can download the driver file from the Cisco.com site for downloading the switch software.Note
Step 2
If using 32-bit Windows Vista or Windows 7, double-click the setup.exe file in the Windows_32 folder. If using 64-bit
Windows Vista or Windows 7, double-click the setup(x64).exe file in the Windows_64 folder.
Step 3
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 4
The Ready to Install the Program window appears. Click Install.
If a User Account Control warning appears, click Allow - I trust this program to proceed.Note
Step 5
The InstallShield Wizard Completed window appears. Click Finish.
Step 6
Connect the USB cable to the PC and the switch console port. The USB console port LED turns green, and the Found
New Hardware Wizard appears. Follow the instructions to complete the driver installation.
Uninstalling the Cisco Microsoft Windows USB Driver
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver
Use the Windows Add or Remove Programs utility or the setup.exe file.
Using the Setup.exe Program
Before You Begin
Disconnect the switch console terminal before uninstalling the driver.
Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide
71
Configuring the Switch with the CLI-Based Setup Program
Uninstalling the Cisco Microsoft Windows USB Driver

Cisco Catalyst 3560-CX Specifications

General

Brand	Cisco
Model	Catalyst 3560-CX
Category	Switch
Language	English