Cisco Catalyst IW6300 Series User Manual

CHAPTER 2
Before You Begin
This chapter describes what steps you need to take before beginning the installation of your Access Point.
• Unpacking the Access Point, on page 13
• Tools and Hardware, on page 14
• Warnings, on page 15
• Safety Information, on page 15
• Avoiding Damage to Radios in a Testing Environment, on page 17
• Installation Guidelines, on page 19
Unpacking the Access Point
When you are unpacking the access point, do not remove the foam blocks attached to the antenna connectors.
The foam protects the antenna connectors during installation.
To unpack the access point, follow these steps:
Procedure
Step 1 Open the shipping container and carefully remove the contents.
Step 2 Return all packing materials to the shipping container, and save it.
Step 3 Ensure that all items listed in Package Contents, on page 13 are included in the shipment. If any item is
damaged or missing, notify your sales representative.
Package Contents
The typical access point package contains the following items:
• Access point
• IW-6300H-AC-x-K9 (AC power model)
• IW-6300H-DC-x–K9 (DC power model)
• IW-6300H-DCW-x-K9 (DC wide range power model)
Cisco Catalyst IW6300 Heavy Duty Series Access Point Hardware Installation Guide
13

Cisco Catalyst IW6300 Series Specifications

General

Brand	Cisco
Model	Catalyst IW6300 Series
Category	Wireless Access Point
Language	English