1-58
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Chapter 1 Overview of the Content Delivery Engines
Hardware Features
Note The CDE280, CDE285-S and CDE285-L engine supports the CIMC (Cisco Integrated
Management Controller).
Caution Once the product installation is complete, all I/O cables, except those installed in the Ethernet ports,
must be disconnected from the CDE to maintain EMC compliance. Any other cable connections are
temporary and are used only to initialize the system. All PS/2 keyboard, PS/2 mouse, USB interface,
serial console interface, and VGA interface cables must be disconnected from the front and rear I/O ports
of the CDE.
Figure 1-8 shows the location of the CDE rear panel ports and connectors.
To Next Page
Loading...
Need help?
General
