Cisco RV130W Administration Guide

Managing Your Device
Backing Up and Restoring the System
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 132
8
By default, the file (startup.cfg, mirror.cfg, or backup.cfg) is downloaded in the
default Downloads folder; for example, C:\Documents and Settings\admin\My
Documents\Downloads\.
STEP 4 To clear the selected configuration, click Clear.
Restoring the Configuration Settings
To restore a previously saved configuration file:
STEP 1 Choose Administration > Backup/Restore Settings.
STEP 2 In the Configuration Upload field, select the configuration to upload (Startup
Configuration or Backup Configuration).
STEP 3 Click Browse to locate the file.
STEP 4 Select the file and click Open.
STEP 5 Click Start to Upload.
The device uploads the configuration file and uses the settings it contains to
update the Startup Configuration. The device then restarts and uses the new
configuration.
Copying the Configuration Settings
Copy the Startup Configuration to the Backup Configuration to ensure that you
have a backup copy in case you forget your username and password and get
locked out of Device Manager. To get back into Device Manager, reset the device
to factory default.
The Backup Configuration file remains in memory and allows the backed up
configuration information to be copied to the Startup Configuration, which restores
all of the settings.
To copy a configuration (for example, to copy a startup configuration to the backup
configuration):
STEP 1 Choose Administration > Backup/Restore Settings.
STEP 2 In the Copy field, choose the source and destination configurations from the drop-
down menus.

Cisco RV130W Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Supported network protocols	DHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2-PSK
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, USB, WAN, WLAN
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %