Cisco RV130W Administration Guide

Configuring Wireless Networks
Configuring Device Mode
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 80
4
Configuring Device Mode
You can configure your device to work in the following modes:
• Router—To act as a wireless router.
• AP (access point)—To provide wireless connections to clients and extend
Wi-Fi capability to an existing wired network. All LAN ports are disabled
when the device works as an access point.
Ensure that you configure the AP management VLAN information on the
Networking > WAN > WAN Configuration page. For more information, see
Configuring Optional Network Settings.
To configure the device mode:
STEP 1 Choose Wireless > Device Mode, and select the mode in which you want to run
your device.
STEP 2 Click Save.

Cisco RV130W Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Supported network protocols	DHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2-PSK
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, USB, WAN, WLAN
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %