EasyManuals Logo
Home>Cisco>Network Router>RV130W

Cisco RV130W Administration Guide

Cisco RV130W
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Configuring Networking
Configuring IPv6
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 52
3
Configuring Tunneling
IPv6-to-IPv4 tunneling (6-to-4 tunneling) allows IPv6 packets to be transmitted
over an IPv4 network. IPv4 to IPv6 tunneling (4-to-6 tunneling) allows IPv4 packets
to be transmitted over an IPv6 network.
6 to 4 Tunneling
6-to-4 tunneling is typically used when a site or end user wants to connect to the
IPv6 Internet using the existing IPv4 network.
To configure 6-to-4 tunneling:
STEP 1 Select Networking > IPv6 > Tunneling.
STEP 2 In the 6 to 4 Tunneling field, check Enable.
STEP 3 Choose the type of tunneling:
6to4
6RD (Rapid Deployment)
ISATAP (Intra-Site Automatic Tunnel Addressing Protocol) - Choose Auto or
Manual.
STEP 4 For 6RD Tunneling, choose Auto or Manual. If you choose Manual, enter the
following information:
IPv6 Prefix
IPv6 Prefix Length
Border Relay
IPv4 Mask Length
STEP 5 For ISATAP Tunneling, choose Auto or Manual. If you choose Manual, enter the
following information:
IPv6 Prefix
IPv6 Prefix Length
STEP 6 Click Save.

Table of Contents

Other manuals for Cisco RV130W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130W and is the answer not in the manual?

Cisco RV130W Specifications

General IconGeneral
DSL WAN-
Ethernet WANYes
SIM card slotNo
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Supported network protocolsDHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity2
Security algorithmsWEP, WPA, WPA2-PSK
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, USB, WAN, WLAN
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %

Related product manuals