Cisco RV130W Administration Guide

Configuring Wireless Networks
Detecting Rogue Access Points
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 73
4
To authorize detected access points:
STEP 1 In Rogue AP Detected Table, check the box for the access point that you want to
authorize.
STEP 2 Click Authorize.
To add an access point to the Authorized AP table:
STEP 1 Click Add Row.
STEP 2 Enter the MAC address of the access point that you want to authorize.
STEP 3 Enter the SSID or the name that identifies the wireless network.
STEP 4 Choose the security mode associated with the access point.
STEP 5 Choose TKIP (Temporal Key Integrity Protocol) or CCMP (Counter Cipher Mode
Protocol) as the encryption algorithm associated with the access point.
STEP 6 Choose RADIUS server or PSK (Pre-Shared Key) to authenticate the access point.
STEP 7 Select the wireless network mode that the access point uses.
STEP 8 Choose the radio frequency that the access point uses.
STEP 9 Click Save.
Importing Authorized AP Lists
You can import a list of authorized access points using a CSV file. Use the
following values as a reference when you create the CSV file.

Cisco RV130W Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Supported network protocols	DHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2-PSK
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, USB, WAN, WLAN
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %