EasyManuals Logo
Home>Cisco>Network Router>RV130W

Cisco RV130W Administration Guide

Cisco RV130W
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Configuring Networking
Cloning the MAC Address
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 38
3
To assign ports to link aggregation group:
STEP 1 Choose Networking > LAN > Link Aggregation. The Port Status section displays
the mode associated with each port on the device and the status.
STEP 2 In the Link Aggregation Setting Table section, check the check box for each port to
include it in the group.
STEP 3 Click Save.
Cloning the MAC Address
Sometimes, you might need to set the MAC address of the device WAN port to be
the same MAC address as your PC or some other MAC address. This is called
MAC address cloning.
For example, some ISPs register your computer card MAC address when the
service is first installed. When you place a router behind the cable modem or DSL
modem, the MAC address from the device WAN port is not recognized by the ISP.
In this case, to configure your device to be recognized by the ISP, you can clone
the MAC address of the WAN port to be the same as your computer MAC address.
To configure a MAC address clone:
STEP 1 Choose Networking > MAC Address Clone.
STEP 2 In the MAC Address Clone field, check Enable.
STEP 3 To set the MAC address of the device WAN port, do one of the following:
To set the MAC address of the WAN port to your PC MAC address, click
Clone My PC’s MAC.
To specify a different MAC address, enter it in the MAC Address field.
STEP 4 Click Save.

Table of Contents

Other manuals for Cisco RV130W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130W and is the answer not in the manual?

Cisco RV130W Specifications

General IconGeneral
DSL WAN-
Ethernet WANYes
SIM card slotNo
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Supported network protocolsDHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity2
Security algorithmsWEP, WPA, WPA2-PSK
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, USB, WAN, WLAN
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %

Related product manuals