EasyManuals Logo
Home>Cisco>Network Router>RV130W

Cisco RV130W Administration Guide

Cisco RV130W
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Viewing Device Status
Viewing Connected Devices
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 17
2
Error—Messages about conditions that are not critical but require corrective
action.
Warning—System warnings.
Notification—Messages about normal but significant conditions that may
require attention.
Informational—Messages about device information.
Debugging—Detailed information about an event.
To delete all entries in the log window, click Clear Logs.
To save all log messages from the device to the local hard drive, click Save Logs.
To specify the number of entries to show per page, choose a number from the
drop-down menu.
To move between log pages, use the page navigation buttons .
Viewing Connected Devices
The Connected Devices page displays information about the active client
devices connected to your router. To view connected devices, choose Status >
Connected Devices.
To specify the types of interfaces to display, select a value from the Filter drop-
down menu:
All—All devices connected to the router.
WirelessAll devices connected through the wireless interface.
Wired—All devices connected through the Ethernet ports on the router.
WDS—All Wireless Distribution System (WDS) devices connected to the
router.
IPv4 ARP Table displays information from other routers that have responded to
the device’s Address Resolution Protocol (ARP) request. If a device does not
respond to the request, it is removed from the list.
IPv6 NDP Table displays all IPv6 Neighbor Discovery Protocol (NDP) devices
connected to the device’s local link.

Table of Contents

Other manuals for Cisco RV130W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130W and is the answer not in the manual?

Cisco RV130W Specifications

General IconGeneral
DSL WAN-
Ethernet WANYes
SIM card slotNo
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Supported network protocolsDHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity2
Security algorithmsWEP, WPA, WPA2-PSK
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, USB, WAN, WLAN
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %

Related product manuals