5
Cisco Small Business 200 Series Smart Switch Administration Guide 44
General Administrative Information
This section describes how to view system information and configure various
options on the switch.
It covers the following topics:
• Switch Models
• System Information
• Rebooting the Switch
• Monitoring the Fan Status and Temperature
• Defining Idle Session Timeout
• Pinging a Host
Switch Models
All models can be fully managed through the web-based switch configuration
utility.
In Layer 2 system mode, the switch forwards packets as a VLAN-aware bridge. In
Layer 3 system mode, the switch performs both IPv4 routing and VLAN-aware
bridging.
NOTE The following port conventions are used:
• GE is used for Gigabit Ethernet (10/100/1000) ports.
• FE is used for Fast Ethernet (10/100) ports.
• .
The following table describes the various models, the number and type of ports
they contain and their Power over Ethernet (PoE) information.
To Next Page
Loading...
Need help?
General
