Cisco UCS Administration Guide

CHAPTER
3-1
Cisco UCS Invicta Scaling System Administration and Configuration Guide, Version 5.0.1.1a
3
SSR Configuration
This section covers topics related to the Cisco UCS Invicta Scaling System SSR configuration:
• Network Settings, page 3-1
• Default Gateway, page 3-3
• MPIO Settings, page 3-8
• Volume Group and Node Settings, page 3-9
• iSCSI Settings, page 3-10
• Error Correction, page 3-11
• Support Settings, page 3-11
• System Update, page 3-13
• Uninstall Update, page 3-14
Network Settings
Caution Modifying network settings will cause a brief interruption of connectivity to the Cisco UCS Invicta
Scaling System. Use extreme caution when changing the settings on this window.
The Network Settings menu window displays the Ethernet Bond Status table. This is a sortable list of all
bonds currently available on this Cisco UCS Invicta Scaling System. It also displays a sortable list of
Fibre Channel interfaces. Right clicking an interface presents menu options, for example, enable/disable,
and so on.
The top buttons on this window can be clicked to create a new network interface bond, set a default
gateway, set the DNS servers, and set static routes.
This section describes how to create, edit, and remove a bond and explains the available bonding modes.
Caution Bond0 must not be deleted. Changing bond0 can potentially sever the Cisco UCS Invicta Scaling System
connection.

Cisco UCS Specifications

General

Brand	Cisco
Model	UCS
Category	Server
Language	English